Models, screenshots and documented study results from Whet.
None of these images is AI-generated. Each is a solid model built with Whet's engines, rendered or captured from the window; nothing is painted or retouched.
V6 engine
How it grew from the first model to the detailed V6 v2: 783 parts, 1:1, Duratec 30 class, 89 x 80 mm, function-checked. Details
V6 v2, 783 parts at 1:1, 194.9 kg, on its two engine mounts: timing cover, 6-rib belt drive, air filter and 72 mm throttle body. v6v2-hero, 2026-10-06
All 783 parts moved out along their groups' directions, every fastener a further 45 mm along its own axis over its hole. v6v2-exploded, 2026-10-06
The second model, v6-az: 2.99 L, 60 degrees, 89 x 80 mm, with heads, camshafts, timing chain and manifolds. v6az-g-engine, 2026-09-30
The first model, v6: the complete engine of 414 parts, with block-shaped manifolds and plain covers. v6-complete, 2026-09-29
The front-left quarter cut away through bank A's bore plane: pistons, rods, crank, valves, cam and the 142-link chain stand whole. v6v2-cutaway, 2026-10-06
The accessory drive: one belt wraps the crank damper 63 degrees, the A/C 133, the alternator 119 and the water pump 73, with an idler and a tensioner. v6v2-front-drive, 2026-10-06
Bank A's cam cover: 14 M6 flange bolts in threaded taps, a 2 mm gasket, the raised 2986 CC, a PCV valve and the high-pressure pump. v6v2-cam-cover, 2026-10-06
The fuel side in the valley: each bank's high-pressure line from its cam-driven pump to the rail, flare nuts at both ends. v6v2-rail, 2026-10-06
Coil-on-plug packs on bank A: each boot on its plug's terminal through the cover, each coil bolted to a threaded ear boss, the harness on clips. v6v2-coils, 2026-10-06
From above: the plenum and throttle between two black cam covers, six coil packs, the oil filler and the PCV valve. v6v2-top, 2026-10-06
CO2 capture plant
Amine CO2 capture, liquefaction and rail loading at a cement works, sized for 100,000 t/y: 32,815 parts in five area assemblies.
A slipstream of the kiln flue gas through quench, absorber and stripper, then compression, liquefaction, two 300 m3 tanks and the rail siding. 32,815 part instances from 2,002 part files, 12,565 t with the civil works. pu-r01-site-overview, 2026-10-24
Quench column C-101 (ID 2800), absorber C-102 (ID 2500) and stripper C-103 (ID 1800), each with one quadrant of shell, insulation and internals cut away. pu-r04-columns-cutaway, 2026-10-24
Absorber C-102, ID 2500 x 31.5 m tangent to tangent, opened: structured packing in two 8 m beds under a 3 m water wash, with platforms, caged ladders and the flue gas inlet duct. pu-r05-absorber-cutaway-detail, 2026-10-24
Storage and loading: two 300 m3 liquid CO2 tanks, ID 3600 x 28.0 m on saddles, and the loading arm over a rail tank car on the siding. pu-r06-storage-loading, 2026-10-24
CNC machining centre
A 3-axis vertical machine, 600 x 400 x 400 mm travel: 1016 parts, 433 threaded fasteners. Details
Designed in Whet: 1016 parts from 167 kernel-built specs, 433 threaded fasteners each in its own modelled thread. Audit: 0 unpaired, 0 overlaps, 0 floating. cnc-hero, 2026-10-06
The machine in its sheet-steel enclosure with both doors slid open and the pendant on its swing arm. cnc-enclosure-open, 2026-10-06
The Z axis: size-35 rails, a 32 x 10 ball screw between a fixed 7205-pair support and a floating 6204 support, rail bellows and the cable carrier. cnc-z-axis, 2026-10-06
The BT30 / ER32 holder and a 10 mm three-flute end mill over the 150 x 100 x 20 aluminium plate in a 150 mm vise. cnc-spindle-part, 2026-10-06
The axis groups moved apart along their own slides: frame, Y ways, saddle, table, Z ways, head and spindle. cnc-exploded, 2026-10-06
Column, Z ways, head and spindle held at the column foot: first natural frequencies 84.2, 95.1, 145.0 and 156.9 Hz (CalculiX, 129,980 nodes, 1312 kg). cnc-modal-mode1, 2026-10-06
Spindle cartridge with 220 W into the front bearing seat and 80 W into the rear, a chilled-oil jacket at 22 C: 54.9 C peak at the front bearings. cnc-spindle-heat, 2026-10-06
The machine opened in the Whet window with its model tree open at the frame: level screws, nuts, foot pads, dowels and three fixed joints, then the y-axis sub-assembly. cnc-window-model-tree, 2026-10-08
Tokamak study
A SPARC-class design with 18 TF coils, and where it fails. Details
SPARC-class, R0 1.85 m, minor radius 0.57 m. Coil case peak von Mises, element: 929 MPa against a 1000 MPa yield at 4 K, a factor of safety of 1.08. The colour scale is drawn from the nodal average, a different reading, and tops at 1016 MPa. tok-coil-stress, 2026-09-30
Divertor under 10 MW/m2: 771.9 C peak. The thermal stress gives a factor of safety of 0.16, so the design needs an interlayer. tok-tile-temperature, 2026-09-30
Inside the software
The Whet window: start, sketch, model, study, scan to CAD.
The Start page: a new Part, Sketch or Assembly, Open, recent projects, and four samples: Bracket, Heat Sink, Gantry and Bracket Render. after-01-home, 2026-10-12
A rectangle sketched on XY: 4 pieces of geometry, 9 constraints, 2 degrees of freedom left. The Sketch row: Select, Create, Snap, Constrain, Solid, Finish. after-02-sketch-row, 2026-10-12
Pad h10 on the sketch: 60.00 x 40.00 x 10.00 mm, 24000 mm3, 6800 mm2, solid check passed. The Model row: Sketch, Create, Modify, Pattern, Inspect, Insert, Study. after-03-model-row, 2026-10-12
With the top face picked, the Model row adds Sketch On Face, Loads and Supports beside Hole, Pattern and Inspect. after-04-face-row, 2026-10-12
The Modify panel opened: Fuse, Cut, Common and the other Booleans, Thickness, Draft, 3D Offset, Scaled and Edit Spec. after-11-modify-list, 2026-10-12
The Assemble row: New Joint, Connections, Assemble, Standard Part, Run Rig, and the Assembly and Physics records. after-07-assemble-row, 2026-10-12
Strength before a solve: material, fixed support and load still needed, and Solve says why it cannot run: no material chosen. after-05-strength-row, 2026-10-12
Thermal on the plate: 20 C held on the face at x = 0, material still needed; Solve says no conductivity is stated. after-06-thermal-row, 2026-10-12
The heat sink sample solved: maximum 23.57 C and minimum 20.00 C marked on the part, the legend in C. 04-strip-dismissed, 2026-10-12
Scan to CAD: a surface fitted over a scanned panel at 0.100 mm tolerance; deviation from the scan +0.089 to -0.080 mm, mean 0.028 mm. 03-deviation, 2026-10-12
A surface fitted to section curves on the scan: 4 x 18 control points, deviation 0.005 mm at most, 0.002 mm mean. 13-fit-surface-to-curves, 2026-10-12
Engine housing
The motor housing only: nothing inside it is modelled yet.
The housing only, nothing inside yet: 33 parts and 53 solids, from the finned housing to the grease nipple. motor, 2026-09-29
The assembly tree in the window, one row per part down to lid screws, eyebolt, cable gland, grease nipples and key; the key is selected: part file key-8x7x32.step, 1689.33298 mm3. motor, 2026-09-29
The housing result in the window, housing and end shields together: 56.12 °C peak, 53.57 °C lowest, 55.18 °C mean. 150.0000 W goes in through 3156 nodes of a 223,146-node mesh. One mesh, so mesh convergence is not checked. housing-150w, 2026-09-29
The same study rendered in Cycles, the housing alone: its temperature runs from 53.57 to 55.71 °C and the colour scale spans that range. The 56.12 °C peak is in the end shields, drawn grey. housing-150w, 2026-09-29
One turn on a turntable: 192 frames rendered in Cycles, played in 8 seconds. motor-turntable, 2026-09-29
Limestone chapel
A masonry chapel with a spired tower, tested under its own weight.
The model: nave, tower, roofs, west door, rose tracery, belfry louvres and cross, 8 parts of 111 solids. chapel, 2026-09-29
The chapel result in the window. Peak von Mises, element: 1.354 MPa, read inside an element. Peak, nodal average: 1.720 MPa, the element values carried to the nodes and averaged, a different reading. Peak displacement 0.3540 mm. One mesh, so mesh convergence is not checked. chapel-selfweight-380, 2026-09-29
2738 t of limestone and 365 kN of roof, held at the ground. Peak von Mises, element: 1.354 MPa (1.35 on the picture) at the tower's corner above the plinth, on one mesh of 247,396 nodes. The colour scale stops at 0.5 MPa so the walls can be read; anything higher shows the top colour. chapel-selfweight-380, 2026-09-29
The apse and the south buttresses in the same study, on the same von Mises scale, 0 to 0.5 MPa and above. The bright bands run down the piers and the buttress feet. chapel-vonmises-se-4k, 2026-09-29
Rendered in Cycles under a physical sky, the sun 8 degrees above the horizon, on a grass ground. chapel-outdoor-1080p, 2026-09-29