Whet user guide, chapter 7, 2026-10-09
Import and export
The file formats Whet reads and writes today, and the ones that appear in a menu but do not work yet. A format not listed as working does not work.
What you can bring in
Open File > Import... to pick any file Whet can read. The shortcut is Ctrl+I (Command+I on a Mac). File > Import Format lists one entry per format, so you can go straight to the one you have.
Whet reads two kinds of file.
Solid models. These keep exact surfaces and edges.
| Format | Extensions |
|---|---|
| STEP | .step, .stp |
| IGES | .iges, .igs |
| BREP (OpenCASCADE) | .brep, .brp |
Meshes. These are made of triangles. Faces and edges are not exact surfaces, so you cannot fillet or pick a cylinder on them the way you can on a solid.
| Format | Extensions |
|---|---|
| STL | .stl |
| OBJ | .obj |
| PLY | .ply |
| 3MF | .3mf |
| OFF | .off |
An entry in Import Format is greyed if the engine does not read it. The tooltip says what it does read.
Two formats appear in the list but do not open yet:
- FCStd (a FreeCAD document). Whet refuses it on purpose. A FreeCAD file can carry scripts, and opening one would run them. Export the model from FreeCAD as STEP and import that.
- DXF (a flat drawing). Whet does not open it. It reads solid models and meshes only.
The menu also names SVG. Whet does not open SVG as geometry either. None of these three work today, and no date is promised.
What Whet tells you about an imported file
After an import Whet prints a short sheet. Read it before you trust any number from the part. It covers these points.
- Size and units. STEP, IGES and BREP files carry their units, and Whet converts them to millimetres. Mesh files often do not. A mesh saved in inches can arrive 25.4 times too small and still look reasonable. Whet reads the unit the file declares and says so when it could not apply it. Check the overall size against what you expect.
- Solid or loose faces. A file can describe a solid or only a set of faces. An IGES file often holds six free faces for a box and no solid. Whet counts the volume of real solids only, and it tells you how many free faces and open shells it found. A part with no solid cannot be used for a strength study.
- Repair. The modelling kernel quietly repairs small gaps when it reads a file. Whet cannot see a repair log, so it shows the tolerance the shape came back with next to the tolerance the file promised. A large difference means the file needed repair.
- Mesh checks. For meshes Whet reports whether the surface is closed. On very large meshes (over 200,000 triangles) the self-intersection checks are skipped, and the sheet says so.
Limits on what it will open: a regular file only (not a link to one), not empty, and no larger than about 1 GB. A read that takes more than three minutes is stopped.
What you can write out
Export is narrower than import.
- File > Export > Export STEP writes the part you have open as a STEP solid. Whet also writes a mesh (STL) and the part's description file next to it.
- If you export again after changing the part, Whet says why it is writing again. It will not overwrite a STEP file it did not write itself. The message tells you which file is in the way.
The other formats in the File > Export menu are greyed with the reason "parts export as STEP and STL, not" the format named. These are IGES, BREP, OBJ, PLY, 3MF, OFF and FCStd. They are not working today.
The menu also holds items that write other kinds of file. They are the same commands as in their own menus, so they are greyed or live together.
| Item | What it writes |
|---|---|
| Drawing as PDF... | The open drawing sheet as a PDF page |
| Drawing Sheet | A drawing sheet of a part (also saved as SVG) |
| New Draft Layout | A flat layout of shapes, dimensions and text |
| Profile Toolpath | A machining program for one profile |
| Assemble Document | The written report built from your records |
| Film | A video of a motion run |
Drawing as PDF... is greyed until a drawing sheet is open, and it says "Open a drawing sheet before exporting PDF." A sheet is page-sized, in millimetres, with no margin.
Other exporters live in their own places:
- CAM > Export G-code... writes the machining program. It offers the extensions .nc, .ngc and .gcode.
- Analysis > Results > Export Results is a menu entry that is greyed. Results export is not available yet.
- Renders are PNG pictures. See Rendering and video.
- Video clips, stills and film are written as files you name. Speech is written as an audio file.
What Whet can read as media
Separate from CAD, Whet reads these media files when you probe them: images (PNG, JPEG, GIF, WebP, animated PNG), video (MP4, M4V, MOV), sound (WAV, MP3, FLAC, M4A) and meshes (STL, OBJ, GLB, GLTF). A file in any other format is named as one nothing reads.
Limits
- No IGES, OBJ, PLY, 3MF, OFF or FreeCAD export of a part. STEP and STL only.
- No DXF import. No FreeCAD document import.
- A mesh is not a solid. If you need to fillet, drill or run a strength study, bring in a STEP solid if you can.
- Whet reads units from the file where it can. If the sheet says it could not apply them, measure the part before you go on.